The 8110 is a vibrating level switch for liquids,using a tuning fork for level detection.It is designed for industrial use in areas ofprocess technology and can be used in liquids.Typical applications are overfill or dry run protection.The small tuning fork (40 mm of length) allows theuse in vessels, tanks and pipes.Due to the simple and rugged measuringsystem, the 8110 is virtually unaffected by thechemical and physical features of the liquid.It works even under unfavourable conditionssuch as turbulences, air bubbles, foam generation,buildup or varying products.
Materials
Tuning fork and fitting
Process seal / Housing
Stainless steel 316L (1.4435)
Klingersil / Stainless steel 316L and plastic PEI
Weight Approx. 250 g
Electrical connections Cable plug acc. to EN 175301-803 or M12 x 1 male
fixed connector
Process fitting Thread G, NPT 3/4”, G, NPT 1” or Clamp 2”
Surface finishing quality Ra < 3.2 μm (thread) / Ra < 0.8 μm (Clamp)
Dynamic viscosity / Density 0.1 to 10000 mPa.s / 0.7 to 2.5 g/cm3
Fluid temperature -40 to 100°C (150°C for Clamp process connection)
Fluid pressure -1 to 64 bar
本月特价
分享仪器
隐藏对比框