本月特价 热卖产品 货到付款 现场演示 延长保修 终身维修
|
6000TCX Series Extra Thick Coating Models
|
|
Range: 0 - 500 mils (13 mm)
Resolution: 1 mil / 0.02 mm Substrates: F or N The 6000TCX Series Extra Thick Coating Thickness Gauge is a versatile, rugged tester using magnetic and eddy current principles to measure coating thickness on ferrous or non-ferrous metals, accurately and quickly. If measurement on both Fe and NFe is required a second optional probe can be ordered separately and swapped when needed.
For typical paint and coating applications for a thickness range of 0-500 mils (0-13 mm) applied to Ferrous substrates models include 6000-FKS1, 6000-FKS2 and 6000-FKS3. Models for use on Non-Ferrous substrates include 6000-NKS1, 6000-NKS2 and 6000-NKS3.
All models are offered in three possible configurations; BASIC (1), STANDARD (2) and MEMORY (3) permitting users to select the feature set most suitable for their application. Refer to table below summarizing the different features included with each type "1", "2" or "3". |
|
|
|
Feature Comparison Chart |
Basic (1) |
Standard (2) |
Memory (3) |
|
Hi-Lo limits audibly and visibly alerts when measurements exceed your specified limits |
- |
||
|
Instantly calculate average, standard deviation, min/max thickness and number of readings while measuring |
- |
||
|
Reading Storage Capacity |
- |
250 in one group |
10,000 in up to 1000 groups |
|
SSPC PA2 feature set determines if film thickness over a large area conforms to user-specified min/max levels |
- |
- |
|
|
PSPC 90/10 feature determines if a coating system complies with an IMO performance standard for protective coatings |
- |
- |
|
|
Built in clock to date and time stamp each stored measurement |
- |
- |
|
|
Multiple stored calibration adjustments for measuring on a variety of substrate conditions |
- |
- |
|
|
PosiSoft downloading and charting software (includes USB cable) |
- |
optional |
|
|
Built-in IR port for printing to an optional portable printer |
- |
分享仪器
隐藏对比框