It is intended for the testing of cracks, porosity, inadmissible thinning and other infringements uniformity sheetings of metal products the appendix of pulse high-voltage pressure and fixing of electric breakdown.
|
High safety at the expense of a pulse operating mode
Big set of replaceable electrodes
Thickness of testing coverings to 12mm |
Adjustment of pressure on an electrode
Mains power: from batteries
Small dimensions and weight |
Basic Delivery Set
High-voltage transformer-holder VT2
Block of the testing
Brush (fan) electrode
T-shaped electrode
Extension
Recharger
Magnet
Earth conductor
Cover
Transport bag
Additional implements
External spring electrodes
Intratrumpet disk electrodes
Rectangular rubber electrodes
Brush (fan) electrodes
Rectangular brush (hair) electrodes
T-shaped electrodes
Crescent electrodes
Technical Characteristics
Range of adjustment of pressure on an electrode
5 - 40 кv
Thickness of testing coverings
to 8 mm
Diameter of testing pipes with external spring electrodes
to 1500 mm
Diameter of testing pipes with internal electrodes
to 1020 mm
Least cross-section size of revealed defect
0,3 mm
Distance between two defects fixed as separate
15 mm
Speed of moving of an electrode
no more 0,35 m/s
Mains power
the built in accumulator
Operating time from batteries
not less than 6 hours
Operating temperature
up to -20 C to +45 C
low temperature: up to -45 C to +45 C
Dimensions of the electronic block (H x W x D)
220 mm x 155 mm x 75 mm
Weight
2 кg (the device with batteries)
1,3 кg (transformer-holder VT2)
本月特价
分享仪器
隐藏对比框