产品描述：
Features of the Model RTC1000 Controller
Cone Fire
Preheat
6 Ramp/Hold Programs
Zone Control
Thermocouple Offset
Other Software Options
Ramp/Hold programs only (no Cone Fire features)
Jewelry Burn Out Programs
New improved features:
Add Time
Back Key
Recall User Program
CONE FIRE METHOD - use when firing to a specific cone number using one of four speeds, "Slow Bisque", "Fast Bisque", "Slow Glaze", or "Fast Glaze".
PREHEAT - Used with CONE FIRE method to hold a temperature of 200 °F for a specified time prior to starting the firing. This can be used for drying ware.
Communicates with personal computer equipped with KISS software.
RTC1000 TECHNICAL SPECIFICATIONS
|
THERMOCOUPLE INPUT |
TYPE K (maximum resistance 100 Ohms) |
|
ACCURACY |
+/- 10° F |
|
COLD JUNCTION COMPENSATION |
ELECTRONIC |
|
POWER INPUT |
24V CENTER-TAP TRANSFORMER |
|
OUTPUTS 1 & 3 |
150mA at 12V ; one 12 V relay with 80 Ohm coil per output |
|
OUTPUTS 2 & 4 |
600mA at 12V ; four 12 V relays with 80 Ohm coil |
|
OPERATING TEMPERATURE RANGE |
0 TO 125° F or 0 to 52° C |
技术参数：
本月特价
分享仪器
隐藏对比框