HI-PE MZ高性能金属探测器

Complete security in detection

Double display provides single or multiple locations of weapons

Very high speed of detection

High immunity to external interferences

Additional highlights

Direct selection of international security standards

High reliability

Local or remote programming with network capabilities

 

The HI-PE MZ (Multi Zone) is a high performance walk through metal detector, which exceeds all international security standards. A “height on person” display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. The location zones are not fixed, as in the case of metal detectors with multiple receiver-transmitter coils, but are variable and continuous to achieve optimum resolution. The panels are washable and will not lose their shape even in humid conditions; they are also equipped with shock absorbent edges to protect it against damages. HI-PE MZ can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure. A photocell transit count, in option, allow counting of the number of people passing through the metal detector.
Locating the weapons detected
In case of detection of a metallic mass, the HI-PE Multi Zone not only provides an acoustical and optical alarm, it also gives an illuminated “height on person” indication by means of two bar displays, which are built into the antenna of the metal detector. These may be programmed to provide a display either on both sides or on just one side of the gate. The special signal analysis system allows the zones in which the metal masses are detected to be displayed with a high degree of precision. This allows inspection procedures to be reduced and consequently provides a significant increase in the rate of people passing through.