产品描述：
CMP 11 uses the temperature compensated detector technology originally developed for the CMP 22 and is a step up in performance from the CMP 6. It is particularly suitable for meteorological networks and the reduced response time of 1.66 seconds (63%) meets the requirements for solar energy applications.
A waterproof socket is fitted for the signature yellow signal cable, which is available in a range of lengths pre-wired to the waterproof plug.
The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The connector with gold-plated contacts allows for easy exchange and re-calibration. The screw-in drying cartridge is easy to remove and the replacement desiccant is supplied in convenient refill packets.
The Pyranometer does not require any power, it supplies a low voltage of 0-20mV in relation to the amount of incoming radiation. When a higher voltage level or a 4-20mA signal is required, the Ampbox is the perfect solution.
技术参数：
Product Specification
|
Spectral range |
300 - 2800 nm |
|
Sensitivity |
4 - 10 µV/W/m² |
|
Response time |
< 8 s |
|
Zero offset A |
< 4 W/m² |
|
Zero offset B |
< 15 W/m² |
|
Directional error (up to 80 ° with 1000 W/m² beam) |
< 20 W/m² |
|
Temperature dependence of sensitivity (0 ºC to +100 ºC) |
< 2 % |
|
Operating temperature range |
-40 °C to +150 °C |
|
Maximum solar irradiance |
4000 W/m² |
|
Field of view |
180 ° |
本月特价
分享仪器
隐藏对比框