本月特价 热卖产品 货到付款 现场演示 延长保修 终身维修
|
TX2 Tape Tension Meter with rollers point away from operator |
|
Special model where the rollers point away from the operator as the scale is viewed for applications where the access is limited to the front or top of the tape. Cylindrical rollers are offered in 7, 10, 15, 20, 30, 36, 41 and 50 mm lengths. Roller length should not exceed 2x the width of the material being measured. Tension Ranges: Refer to DX2 Data Sheet. NOTE: Starting point of low-range instruments will be higher than DX2. Note: This model does not include a filament guide and material thickness compensator |
|
|
|
Model |
Range |
Outer Roller Spacing |
Roller Widths |
|
TX2-5 |
10 - 50 g |
57 mm |
7 |
|
TX2-12 |
20 - 120 g |
57 mm |
7,10,15,20,30 |
|
TX2-20 |
20 - 200 g |
57 mm |
7,10,15,20,30 |
|
TX2-40 |
20 - 400 g |
57 mm |
7,10,15,20,30 |
|
TX2-SP |
20 - 1000 g |
57 mm |
7,10,15,20,30,36,41,50 |
|
TX2-200 |
200 - 2000 g |
117 mm |
7,10,15,20,30,36,41,50 |
|
TX2-500 |
400 - 5000 g |
117 mm |
7,10,15,20,30,36,41,50 |
|
TX2-1K |
2.5 - 10 kg |
117 mm |
7,10,15,20,30 |
|
TX2L-2K |
5 - 20 kg |
117 mm |
7,10,15,20 |
|
|
Accuracy |
± 1% of full scale or ± 1 graduation mark on scale |
|
Diameter of Scale |
41 mm |
|
Maximum Speed |
1000 m/min |
|
Roller Material |
Hardcoated aluminium |
|
Housing Material |
Die-cast aluminum |
|
Temperature range |
50 - 113°F (10 - 45°C) |
|
Air humidity |
85 % RH, max. |
|
Housing dimensions(L x W x H) |
7.5 x 3.3 x 1.8 in(188 x 85 x 45 mm) |
|
Weight, net (gross) |
1.2 lbs (3 lbs) |
分享仪器
隐藏对比框