详细介绍 |
|
Wide frequency range : 0.02Hz to 2MHz in 7 range 4-in-1 sweep, function & pulse generator frequency er Versatile waveforms : Sine, Triangle, Ramp, Pulse sawtooth DC output Built-in 6 digit internal external er display (Max. 50MHz) Internal external linear sweep control from 1 : 1 to 100 : 1 Low distortion factor less than 1% at 0.2Hz to 100kHz TTL CMOS leveled square wave output Variable DV offset control Variable symmetry to generate sawtooth pulse waveform Variable output level control with 20dB attenuator amplitude control
韩国EZ.DIGITAL 信号发生器FG-7002C技术参数 |
功能描述 |
|
Output waveform |
Sine, Triangle, Square, Pulse sawtooth, Ramp, TTL, CMOS |
Frequency range |
0.02Hz~2MHz in the 7 ranges |
Frequency accuracy |
1 |
Input voltage |
0 to 10V(DC + AC peak) |
Frequency variable range |
100 : 1 or more |
DC offset |
【10V(without load), 【5(with load) |
Symmetrical variable range |
10 : 1 to 1 : 10 or more |
Distortion |
less than 1%(0.2Hz ~ 100kHz) |
Rise / fall time |
less than 110ns |
Linearity |
less than 1% up to 100kHz less than 5% up to 2MHz |
Output |
TTL level |
Rise/fall time |
less than 25ns |
Output |
4V~15V 【 1V, continuously variable |
Rise/fall time |
less than 110ns (at Max. output level) |
Width |
1 : 1 to 100 : 1 |
Rate |
20ms to 2s (50hz to 0.5Hz) |
Internal sweep |
linear |
External sweep |
by means of VCF input |
Output voltage |
20Vp-p (open circuit), 10Vp-p(into 50з) |
Attenuator |
-20dB |
Impedance |
50з 【 5% |
Display |
6 digit green LED(0.2Hz ~ 50MHz) |
Accuracy |
time base error 【 1 er |
Input sensitivity |
100mV on kHz range 300mV on MHz range |
Max. input voltage |
150Vrms at 1kHz |
Operating environmen |
0∩ ~ 35∩, 85% RH |
Range for guaranteed |
25∩【 5∩, 75% RH |
Power requirement |
AC 115 / 230V 【 10%, 50/60Hz |
Power consumption |
approx. 20W |
Accessories |
power cord, fuse, operation manual, BNC cable |
物理特性 |
|
长度 |
260mm |
宽度 |
255mm |
高度 |
80mm |
持有证书 |
|
|
CE |